from esphome import pins
import esphome.codegen as cg
from esphome.components import i2c
from esphome.components.i2c import I2CBus
import esphome.config_validation as cv
from esphome.const import (
    CONF_I2C_ID,
    CONF_ID,
    CONF_INPUT,
    CONF_INVERTED,
    CONF_MODE,
    CONF_NUMBER,
    CONF_OPEN_DRAIN,
    CONF_OUTPUT,
)

CODEOWNERS = ["@jesterret", "@clydebarrow"]
DEPENDENCIES = ["i2c"]
MULTI_CONF = True
ch422g_ns = cg.esphome_ns.namespace("ch422g")

CH422GComponent = ch422g_ns.class_("CH422GComponent", cg.Component, i2c.I2CDevice)
CH422GGPIOPin = ch422g_ns.class_(
    "CH422GGPIOPin", cg.GPIOPin, cg.Parented.template(CH422GComponent)
)

CONF_CH422G = "ch422g"

# Note that no address is configurable - each register in the CH422G has a dedicated i2c address
CONFIG_SCHEMA = cv.Schema(
    {
        cv.GenerateID(CONF_ID): cv.declare_id(CH422GComponent),
        cv.GenerateID(CONF_I2C_ID): cv.use_id(I2CBus),
    }
).extend(cv.COMPONENT_SCHEMA)


async def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    await cg.register_component(var, config)
    # Can't use register_i2c_device because there is no CONF_ADDRESS
    parent = await cg.get_variable(config[CONF_I2C_ID])
    cg.add(var.set_i2c_bus(parent))


# This is used as a final validation step so that modes have been fully transformed.
def pin_mode_check(pin_config, _):
    if pin_config[CONF_MODE][CONF_INPUT] and pin_config[CONF_NUMBER] >= 8:
        raise cv.Invalid("CH422G only supports input on pins 0-7")
    if pin_config[CONF_MODE][CONF_OPEN_DRAIN] and pin_config[CONF_NUMBER] < 8:
        raise cv.Invalid("CH422G only supports open drain output on pins 8-11")


CH422G_PIN_SCHEMA = pins.gpio_base_schema(
    CH422GGPIOPin,
    cv.int_range(min=0, max=11),
    modes=[CONF_INPUT, CONF_OUTPUT, CONF_OPEN_DRAIN],
).extend(
    {
        cv.Required(CONF_CH422G): cv.use_id(CH422GComponent),
    }
)


@pins.PIN_SCHEMA_REGISTRY.register(CONF_CH422G, CH422G_PIN_SCHEMA, pin_mode_check)
async def ch422g_pin_to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    parent = await cg.get_variable(config[CONF_CH422G])

    cg.add(var.set_parent(parent))

    num = config[CONF_NUMBER]
    cg.add(var.set_pin(num))
    cg.add(var.set_inverted(config[CONF_INVERTED]))
    cg.add(var.set_flags(pins.gpio_flags_expr(config[CONF_MODE])))
    return var