# this configuration file has all empty components set up.
# use 'esphome compile test_empty_components.yaml' to build.

packages:
  device: !include device.yaml  # include our test device setup

interval:
  - interval: 3s
    then:
      - if:
          condition:
            - empty_automation.component_on: empty_automation_1
          then:
            - logger.log: "empty_automation.component_on"
            - empty_automation.set_state:
                id: empty_automation_1
                state: false
          else:
            - logger.log: "empty_automation.component_off"
            - empty_automation.set_state:
                id: empty_automation_1
                state: true

sensor:
  - platform: empty_sensor
    name: Empty sensor

  - platform: empty_i2c_sensor
    name: Empty I2C sensor

  - platform: empty_spi_sensor
    name: Empty SPI sensor
    cs_pin: 15

  - platform: empty_uart_sensor
    name: Empty UART sensor

  - platform: empty_compound_sensor
    sensor1:
      name: Sensor 1
    sensor2:
      name: Sensor 2
    sensor3:
      name: Sensor 3

  - platform: empty_sensor_hub
    name: Sensor for empty sensor hub
    empty_sensor_hub_id: empty_sensor_hub_1

binary_sensor:
  - platform: empty_binary_sensor
    name: Empty binary sensor

  - platform: empty_sensor_hub
    name: Binary sensor for empty sensor hub
    empty_sensor_hub_id: empty_sensor_hub_1

output:
  - platform: empty_binary_output
    id: empty_binary_output_1

  - platform: empty_float_output
    id: empty_float_output_1

light:
  - platform: empty_light
    name: Empty light
    output: empty_float_output_1

switch:
  - platform: empty_switch
    name: Empty switch

fan:
  - platform: empty_fan
    name: Empty fan
    output: empty_binary_output_1

text_sensor:
  - platform: empty_text_sensor
    name: Empty text sensor

  - platform: empty_sensor_hub
    name: Text sensor for empty sensor hub
    empty_sensor_hub_id: empty_sensor_hub_1

cover:
  platform: empty_cover
  name: Empty cover

empty_automation:
  id: empty_automation_1
  on_state:
    - logger.log: "Empty automation on_state triggered"

empty_component:
  id: empty_component_1

i2c:
  sda: 21
  scl: 22

empty_gpio_component:
  id: empty_gpio_component_1
  pin: 13

empty_i2c_component:
  id: empty_i2c_component_1
  address: 0x01

uart:
  tx_pin: 17
  rx_pin: 16
  baud_rate: 9600

empty_uart_component:
  id: empty_uart_component_1

spi:
  clk_pin: 18
  miso_pin: 19

empty_spi_component:
  id: empty_spi_component_1
  cs_pin: 5

empty_sensor_hub:
  id: empty_sensor_hub_1